Beck DB240 Uživatelský manuál stáhnout pdf (Strana 7)

IPC@CHIP

DK241

Getting Started V1.02

2.4 Step 3 – Setting up communication

There are basically two ways to connect your DB240 to your PC: the serial interface and

Ethernet. The simplest connection type is the serial interface. Preferably use it to get access to

the shell of your IPC@CHIP

. Ethernet communication is the most powerful. It may be used to

access the shell via Telnet or SSH and it‟s the easiest way to transfer files to the IPC@CHIP

via FTP.

2.4.1 Setting up the serial communication

To set up serial communication to your Development Board DB240 you need the enclosed

null-modem cable.

1. Connect the null-modem cable to a free serial port of your PC and with the UART1

interface of the DB240.

2. Select the Terminal window in the ONE-Workbench.

3. Click on the green Connect button.

4. Select the Serial connection type and the PC COM port, where you have connected the

null-modem cable. Set the Baud Rate to 19200, Data Bits to 8, Stop Bits to 1 and Parity

and Flow Control to None.

5. Click OK. You‟re now connected to your IPC@CHIP

. Press the Return key in the

Terminal window to see the IPC@CHIP

prompt.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Žádné komentáře

Beck DB240 Uživatelský manuál Strana 7